Pressure Sand Filters / Activated Carbon Filters
Pressure Sand Filters / Activated Carbon Filters
These filters are most popular for removal of turbidity from water. The Pressure Sand Filter consists of a multiple layer of sand with a variety in size and specific gravity. These Filters are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These filters are offered in both horizontal/vertical construction and made from carbon steel or Stainless with face piping and associated Valves.
Range
- APSF and ACF are available vertical and horizontal Design.
- MOC, MS, SS, MSEP and MSRL.
Operation
Raw water/treated effluent flows downwards through the filter bed and as the suspended matter, which is treated by addition of a coagulant like alum or poly electrolyte, is retained on the sand surface and between the sand grains immediately below the surface. There is steady rise in the loss of head over a period and the flow reduces once the pressure drop across the filter is excessive. The filter is then taken out of service and cleaning of the filter media is effected by flow reversal also called as backwash. To assist in cleaning the bed, the backwash operation is sometimes preceded by air scouring by way of agitation through the under-drain system. The air scouring agitates the sand with a scrubbing action, which loosens the intercepted particles. The filter is now ready to be put back into service.
